BULDX / Traffic Safety

Parking product anchors: concrete, asphalt and existing surfaces

BULDX product guides2 min read

Parking fixings must suit the actual supporting surface. A fastener supplied with a product is not automatically appropriate for every concrete, asphalt or layered paving condition.

AI-generated application context: Parking product anchors: concrete, asphalt and existing surfaces
APPLICATION ILLUSTRATIONAI-generated application illustration for this guide. Not a completed BULDX project or an installation drawing.

Selection considerations

Survey substrate thickness, condition and concealed services. Identify membranes or finishes that could be damaged by drilling. Coordinate anchorage with the approved installation detail and the responsible project team.

Mark fixing positions before installation and follow the selected anchor instructions. Include substrate repair where required. Inspect seating and security before opening the route. Keep the anchor and product references in the maintenance record so replacement uses the approved arrangement rather than an unverified generic fastener.

Before you specify or order

  • Survey substrate and concealed layers
  • Confirm the approved anchor arrangement
  • Inspect attachment before reopening

Relevant BULDX catalogue examples

These records illustrate the product types discussed. Compare the full specifications before selecting; listing here does not establish project suitability or make the items interchangeable.

BULDX catalogue illustration of 1830 mm Reflective Rubber Wheel Stop, code BDX-WS-RB-1830
CATALOGUE REFERENCEBDX-WS-RB-1830 · Product geometry from the catalogue; a family illustration may be shared by variants. Consult the selected technical documents for dimensions and the approved fixing detail.
Product and codeSelected catalogue fields
BDX-WS-RB-18301830 mm Reflective Rubber Wheel StopWheel Stops
Length
1830 mm
Width
150 mm
Height
100 mm
Material
Rubber
BDX-SB-RB-300500300 × 500 × 45 mm Rubber Speed BumpSpeed Bumps
Material
Rubber
Module length
500 mm
Installation
Four anchors per module
BDX-SB-RB-400500400 × 500 × 40 mm Reflective Speed BumpSpeed Bumps
Material
Rubber-PVC compound
Installation
Four anchors per module
Browse the complete Traffic Safety catalogue

Common question

Can concrete anchors be used in asphalt without review?

Do not assume so. The substrate and attachment design need confirmation.

References and scope

Product fields are from the BULDX catalogue. Confirm the current selected drawing, supporting performance documents and approved project detail before ordering. External references, where listed, provide background guidance and do not certify these products.