BULDX / Interior Protection

Crash rails: match protection height to trolley impact

BULDX product guides2 min read

Select a crash rail around the equipment that actually contacts the wall. Rail width and projection matter, but a correctly sized rail installed above or below the impact zone can still leave the finish exposed.

AI-generated application context: Crash rails: match protection height to trolley impact
APPLICATION ILLUSTRATIONAI-generated application illustration for this guide. Not a completed BULDX project or an installation drawing.

Selection considerations

Observe loaded trolleys, beds, cleaning machines and service carts at corners and door approaches. Note the contact height and the parts that protrude furthest. Different departments may need different rail arrangements even where the corridor appearance is identical.

The BULDX range includes sections with different widths and wall projections. Compare these as separate measurements, then check backing and replacement-cover arrangements. Review attachment positions against the partition reinforcement. Catalogue descriptions are a starting point for selection; they do not establish the impact capacity of a complete wall assembly.

Before you specify or order

  • Survey actual equipment contact
  • Compare projection separately from width
  • Coordinate backing with the partition contractor

Relevant BULDX catalogue examples

These records illustrate the product types discussed. Compare the full specifications before selecting; listing here does not establish project suitability or make the items interchangeable.

BULDX catalogue illustration of 200 × 25 mm Wall Guard, code BDX-WG-VA-20025
CATALOGUE REFERENCEBDX-WG-VA-20025 · Product geometry from the catalogue; a family illustration may be shared by variants. Consult the selected technical documents for dimensions and the approved fixing detail.
Product and codeSelected catalogue fields
BDX-WG-VA-20025200 × 25 mm Wall GuardCrash Rails
Width
200 mm
Profile length
4 m
Impact insert
Rubber gasket
Installation
Wall plugs and screws suitable for the substrate
ZCR-100DKCompact Crash RailCrash Rails
Width
100 mm
Depth
20 mm
Length
4 m
Core
Aluminium
ZCR-150DKMedium Crash RailCrash Rails
Width
150 mm
Depth
25 mm
Length
4 m
Core
Aluminium
Browse the complete Interior Protection catalogue

Common question

Does a wider rail always protect better?

Only if its position and attachment suit the impact zone. Width alone cannot establish the performance of the installed system.

References and scope

Product fields are from the BULDX catalogue. Confirm the current selected drawing, supporting performance documents and approved project detail before ordering. External references, where listed, provide background guidance and do not certify these products.